Flash adjust, Red-eye removal, Conversion – Panasonic DMC-FZ200K User Manual
Page 145: Flash adjust.] • [red-eye removal] • [conversion, P145)
- 145 -
Recording
Applicable modes:
Adjust the flash output if the recorded pictures are too bright or too dark.
Note
•
You can adjust from [
j
2 EV] to [
i
2 EV] in steps of [1/3 EV].
•
Select [0 EV] to return to the original flash output.
•
[
i
] or [
j
] is displayed on the flash icon in the screen when the flash level is adjusted.
Applicable modes:
When Red-Eye Reduction ([
], [
]) is selected, Red-Eye Removal is performed
whenever the flash is used. The camera automatically detects red-eye and corrects the picture.
Settings: [ON]/[OFF]
Note
•
Only available when [AF Mode] is set to [š] and Face Detection is active.
•
Under certain circumstances, red-eye cannot be corrected.
•
It will be fixed to [ON] during the Intelligent Auto Mode.
•
[Red-Eye Removal] cannot be used in the following cases.
–
[3D Photo Mode] (Scene Mode)
Applicable modes:
With the optional conversion lenses, you can record even more faraway pictures and take
close-up pictures of smaller subjects.
Note
•
Refer to
for details about attaching the lens.
•
Ensure that [Conversion] is set to [OFF] when not using a conversion lens.
•
[Conversion] cannot be used in the following cases.
–
[Panorama Shot]/[3D Photo Mode] (Scene Mode)
•
Read the operating instructions of the conversion lens for details.
[Flash Adjust.]
[Red-Eye Removal]
[Conversion]
Settings
Description of settings
[
]
When you attach the tele conversion lens.
[
]
When you attach the close-up lens.
[OFF]
—
C