Panasonic DMC-FZ200K - Manual (Page 199)

- 199 -
Others
The AC adaptor (optional) can only be used with the designated Panasonic DC coupler
(optional). The AC adaptor (optional) cannot be used by itself.
Preparations:
Turn this unit off and confirm that the lens barrel is retracted.
A Card/battery door
B DC coupler
C DC coupler cover
D AC adaptor
E AC cable
1 Pull open the card/battery door and the DC coupler
cover.
2 Insert the DC coupler into this unit.
•
Insert by pushing the center of the DC coupler.
• Press on the DC coupler until it is locked by lever 1.
3 Pull out the cable through the opening as shown in
the illustration and then close the card/battery door.
•
Be careful not to catch the cable when closing the card/
battery door.
4 Plug the AC adaptor into an electrical outlet.
5 Connect the AC adaptor to the [DC IN] socket of the DC coupler.
Note
• Always use a genuine Panasonic AC adaptor (optional).
• When using an AC adaptor, use the AC cable supplied with the AC adaptor.
• If the AC adaptor and DC coupler are not necessary, then remove them from the digital camera.
Also, please keep the DC coupler cover closed.
• Also read the operating instructions for the AC adaptor and DC coupler.
AC adaptor (optional)/DC coupler (optional)