Panasonic DMC-FZ200K - Manual (Page 214)

- 214 -
Others
• In dark places, noise may appear to maintain the brightness of the LCD monitor. This does not affect
the pictures you are recording.
• Is the flash closed?
> Open the flash. (P75)
• The flash cannot be used in the following cases:
– When using Auto Bracket (P146)
– When recording in [Burst] (except for [ ]) (P80)
– [Scenery]/[Panorama Shot]/[Night Scenery]/[Handheld Night Shot]/[HDR]/[Sunset]/[Glass
Through]/[3D Photo Mode] (Scene Mode)
(P107)
• The flash is activated twice when Red-Eye Reduction (P76) has been set.
• Is Burst Mode set to [ ]?
• [Rotate Disp.] (P67) is set to [ ] or [ ].
• Is there a picture on the built-in memory or the card?
> The pictures on the built-in memory appear when a card is not inserted. The picture data on the
card appears when a card is inserted.
• Is this a folder or picture which was processed in the PC? If it is, it cannot be played back by this unit.
> It is recommended to use the “PHOTOfunSTUDIO” software in the CD-ROM (supplied) to write
pictures from PC to card.
• Has [Filtering Play] been set for playback?
> Change to [Normal Play]. (P156)
Noise appears on the LCD monitor.
Flash
The flash is not activated.
The flash is activated multiple times.
Playback
The picture being played back is rotated and displayed in an unexpected direction.
The picture is not played back.
There are no recorded pictures.