On icon, P209) – Panasonic DMC-FZ200K User Manual
Page 209
- 209 -
Others
[A folder cannot be created]
•
A folder cannot be created because there are no remaining folder numbers that can be used.
> Format the card after saving necessary data on a PC etc.
If you execute [No.Reset] in the
[Setup] menu after formatting, the folder number is reset to 100.
[Picture is displayed for 16:9 TV]/[Picture is displayed for 4:3 TV]
•
Select [TV Aspect] in the [Setup] menu if you want to change the TV aspect.
•
This message also appears when the USB connection cable is connected to the camera only.
In this case, connect the other end of the USB connection cable to a PC or a printer.
(DMC-FZ200)
[Editing operation cannot proceed as information processing is ongoing.]
When a card with pictures deleted or file names changed using a PC or other device is
inserted into this unit, it will automatically retrieve new information and reconstruct the burst
groups. The currently retrieving information icon [
] may be displayed in the playback
screen for long period of time when there are many image files, and deletion or [Playback]
menu cannot be used during this time.
•
If you turn this unit off while information is being retrieved, the pictures for which information was
retrieved up to that point will be saved as a burst group. When you switch on again, the information
retrieval will restart from the same point.
[Recording failed.]
•
You may not record when the recording location is too dark/too bright, or if the subject does not
have enough contrast when recording in 3D.
[This battery cannot be used]
•
Use a genuine Panasonic battery. If this message is displayed even when a genuine Panasonic
battery is used, contact the dealer or Panasonic.
•
If the battery terminal is dirty, clean it and remove any objects.
(DMC-FZ200)
[Please make sure to turn on the power of external microphone.]
•
When attaching the stereo microphone (DMW-MS1: optional), check the battery status and make
sure the power is on before use.