Panasonic DMC-FZ200K User Manual
Page 181
- 181 -
Connecting to other equipment
Note
•
When the picture is not appropriate to view in 3D (disparity is too large, etc.)
–
[Slide Show]:
The picture will be played back in 2D.
–
[Filtering Play]:
Confirmation screen is displayed. Select whether or not to play back the picture in 3D.
•
2 pictures may be displayed side by side when a 3D picture is played back on a TV that is not 3D
compatible.
•
When a picture recorded in 3D is displayed on the screen of this unit, it is played back in 2D
(conventional image).
•
A black screen is displayed for a few seconds when switching back and forth playback of 3D pictures
and 2D pictures.
•
When you select a 3D picture thumbnail, it may take a few seconds for playback to start. After
playback, the thumbnail display may take a few seconds to reappear.
•
When viewing 3D pictures, your eyes may become tired if you are too close to the television screen.
•
If your television does not switch to a 3D picture, make the necessary settings on the TV. (For
details, refer to the operating instructions of the TV.)
•
The following functions cannot be used during the 3D playback.
–
[Setup] menu
–
[Playback] menu
–
Playback Zoom
–
Deleting pictures
•
3D pictures can be saved to your computer or Panasonic devices.