Panasonic DMC-FZ200K - Manual (Page 32)

- 32 -
Basic
In Program AE Mode, you can change the preset aperture value and shutter speed without
changing the exposure. This is called Program Shift.
You can make the background more blurred by decreasing the aperture value or record a
moving subject more dynamically by slowing the shutter speed when taking a picture in
Program AE Mode.
1
Press the shutter button halfway and display the aperture value and
shutter speed value on the screen.
2
While the values are displayed (about
10 seconds), perform the Program Shift by
rotating the rear dial.
• It will switch between Program Shift operation and
Exposure Compensation operation
(P79) every time the
rear dial is pressed while the values are displayed.
• The Program Shift indication A appears on the screen when Program Shift is activated.
• Program Shift is canceled if the camera is turned off or the rear dial is rotated until the
Program Shift indication disappears.
∫ Example of Program Shift
(A): Aperture value
(B): Shutter speed
1 Program Shift amount
2 Program Shift line chart
3 Program Shift limit
Note
• EV is an abbreviation of [Exposure Value], a unit indicating the amount of exposure. The EV
changes with the aperture value or the shutter speed.
• Program Shift is canceled and the camera returns to normal Program AE Mode if more than
10 seconds pass after Program Shift is activated. However, the Program Shift setting is memorized.
• Depending on the brightness of the subject, Program Shift may not be activated.
• Program Shift is available in all ISO sensitivity settings except [ ].
Program Shift
P P 4.0 15
A
1 2 3 4 5 6 7 8 9 10 11 12 13
1 1/2 1/4 1/8 1/15 1/30 1/60 1/125 1/250 1/500 1/1000 1/2000
2
2.8
4
5.6
8
11
14
(B)
(A)