Panasonic DMC-FZ200K - Manual (Page 90)

- 90 -
Recording
You can finely adjust the White Balance when you cannot acquire the desired hue by setting
the White Balance.
1 Select White Balance and then press 1.
• Press 1 again if [ ], [ ] or [ ] is selected.
2 Press 3/4/2/1 to adjust the White Balance and then press
[MENU/SET].
Note
• If you finely adjust the White Balance to A (amber), the White Balance icon on the screen will change
to orange. If you finely adjust the White Balance to B (blue), the White Balance icon on the screen
will change to blue.
• If you finely adjust the White Balance to G _ (green) or M` (magenta), [_] (green) or [`] (magenta)
appears beside the White Balance icon on the screen.
• Select the center point if you are not finely adjusting the White Balance.
• The white balance fine adjustment setting is reflected in the picture when using the flash.
• You can finely adjust the White Balance independently for each White Balance item.
• The white balance fine adjustment setting is memorized even if the camera is turned off.
• The white balance fine adjustment level returns to the standard setting (center point) in the following
cases.
– When you reset the White Balance in [ ] or [ ]
– When you reset the color temperature manually in [ ]
Finely adjusting the White Balance
2 : A (AMBER: ORANGE)
1 : B (BLUE: BLUISH)
3 : G_ (GREEN: GREENISH)
4 : M` (MAGENTA: REDDISH)
A B
G
M
1 2
1 2