Hawk Industries Hawkjaw Jr. Manual 65K-ALS Serial Numbers 4 to 9 - Manual (Page 43)

Changing the Heel Dies (cont.)
6. Slide out the worn Die (D).
7. Make sure the back and sides of
the new Die are clean.
8. Grease the back of the new Die.
9. Insert the new Die into the Die
Holder (DH) with the teeth of the
Die facing out.
10. Place the Die Holder (DH) back
in the Die Pivot Block (DB).
11. Insert the Heel Die Pin (P).
12. Replace the Roller Bushings
(RB).
13. Replace the Heel Die Rollers
(R).
14. Use the 3/4" wrench to replace the
Heel Die Roller Bolts (B) and
Lock Washers.
Maintenance & Repair 43
Maintenance
&
Repair
Part Name Part #
Lock Washer 999-810703
Die Roller Bolt (B) 999-806300
Die Roller (R) 061-20210
Die Roller Bushing (RB) 061-20208A`
Die (D)
061-20194
Die Holder (DH) 061-30031
Part Numbers