Hawk Industries Hawkjaw Jr. Manual 65K-ALS Serial Numbers 4 to 9 - Manual (Page 57)

4. Pull out the Top Grip Cylinder
Rod side Pin (TGP).
5. Pivot out the Top Grip
Cylinder (TC) to expose the
Torque Cylinder Rod Pin (P).
6. Remove the Torque Cylinder Rod
Pin Rubber Safety Cover (S).
7. Pull out the Torque Cylinder
Safety Clip (SC).
8. Pull out the Torque Cylinder Rod
Pin (P).
9. Use the 1 1/8" wrench to slowly
loosen the Rod side Hose (RH)
on the rod side of the torque
cylinder. Check for fluid flow.
Bleed any pressure. Disconnect
the Rod side Hose (RH).
Changing the Torque Cylinder (cont.)
Maintenance & Repair 57
Maintenance
&
Repair
Continued on next page.
S
SC
P