Hawk Industries Hawkjaw Jr. Manual 65K-ALS Serial Numbers 4 to 9 - Manual (Page 53)

8. Slide in the Drive Roller Sprock-
ets (17) . Make sure the "T" on
each Drive Roller Sprocket faces
up.
9. Replace the Bearing Caps (3) and
Bearing Seals (5).
10. Use the 3/4" wrench to replace all
Bearing Cap Bolts (1). Use new
Lock Washers (2) and red loctite
when replacing the Bearing Cap
Bolts (1). Assemble the Lock
Washers (2) as shown. Torque
Bearing Cap Bolts (1) to 75 lb. ft.
Changing the Drive Rollers (cont.)
Maintenance
&
Repair
Maintenance & Repair 53
Part Numbers
Part Name Part #
Bearing Cap Bolt (1) 999-806373
Lock Washers (2)
031-91074A033
Drive Roller (DR) 031-24649
WARNING
Replace all four Drive Rollers. Running the Spinner
with worn Drive Rollers will damage the chain and
hinder Spinner performance.