AMT Datasouth 400 - Manual (Page 19)

User's Guide 19
3. Raise the print head module to the vertical position.
4. Verify that the Ribbon Supply Core and the Take-up Core have two slots on the left
side of the core when the ribbon is positioned to go into the printer. These slots will be
mated to the notches on the Left Ribbon Holders.
Note: The notches are the drive mechanism for the ribbon. If the slots in the core are not
present or if they are in the wrong position, contact your ribbon supplier to obtain
a correct ribbon.
Figure 9 – Ribbon Holder Notch Location
Notch