AMT Datasouth 400 - Manual (Page 75)

User's Guide 75
Hidden Setup Feature and Value List (Continued)
Max Media Length [12-80] inches This feature sets the
maximum length media that
the printer will recognize. In
normal setup mode, this
value sets the upper limit on
the Media Length feature to
avoid excessive menu
scrolling. This also controls
how long of a label the
printer will look for when
performing a label
calibration. Increase this
value if media over 12 inches
long is used.
Keypad Lockout [Enabled, Disabled] When Keypad Lockout is
Enabled, the value of
features may be viewed but
not changed. Also, any
feature value which may be
changed from downline using
a PAL
TM operator is also
locked out from change.
This feature may be used to
keep users from modifying
features or to override host
changes if needed.
Label Count N/A This feature displays the
number of labels printed
since the printer was
manufactured. The total
label length issued by the
printer will be dependant on
the label length used. For
example if 4 inch label stock
is used and the Label Count
feature indicates 100, then
400 inches of media have
been printed.