Cleaning the paper compartment, Cleaning the paper sensor, Figure 22 – paper compartment and paper sensor – AMT Datasouth 400 User Manual
Page 68
User's Guide 68
Cleaning the Paper Compartment
It is recommended that the Paper Compartment be cleaned regularly if exposed to a dust environment. This will keep
dirt and dust from contaminating or damaging your printer (Print Head and Platen).
1.
Turn off the printer and open the top cover.
2.
Remove paper dust by blowing using compressed air or vacuuming.
3.
Clean the paper compartment with cotton, which has been moistened with mild detergent.
Cleaning the paper sensor
It is recommended that the Paper Sensor be cleaned regularly if exposed to a dusty environment. This will prevent
false paper OUT or paper IN conditions.
1.
Turn off the printer and open the top cover.
2.
Remove paper dust by blowing using compressed air or vacuuming.
3.
Clean the two Paper Sensor LED's with cotton stick, which has been moistened with Isopropyl Alcohol.
Figure 22 – Paper Compartment and Paper Sensor
Paper Compartment
Paper Sensor