AMT Datasouth 400 - Manual (Page 67)

User's Guide 67
Cleaning the Platen Roller
It is recommended that the platen roller should be cleaned when:
•
Excessive dusty condition exists.
•
Following a media jam where the adhesive comes in contact with it.
1. Turn off the printer and open the top cover.
2. Lift the print head module to the vertical position.
3. Rub the full length of the platen available with a piece of cotton, which has been moistened with Isopropyl
Alcohol.
4. Manually rotate the platen and repeat step 3 until the entire platen has been cleaned.
Figure 21 – Platen Roller
Note: The roller should be cleaned whenever it has been in contact with foreign materials such as dust or
adhesives.
Platen Roller