AMT Datasouth 400 - Manual (Page 36)

User's Guide 36
PAL TM Print and Program Label Tutorial
This Label Tutorial provides instructional steps showing the basic commands needed to create
labels using PAL
TM Print and Programming Language. This section covers some of the most
common sequences used to print fonts, bar codes, lines etc. Each label introduces a basic concept
and builds on the preceding label. Upon completion of the tutorial, a label consisting of text in
two orientations, a line, a box and a bar code will be covered.
The examples may be created using a text editor and saved for subsequent transmission to the
printer using the FlashWiz program found on the product CD, using the DOS copy command, or
the send file command that is implemented in most terminal emulators.
For a deeper understanding of the concepts behind the sample label and the programming
capabilities of PAL
TM , please refer to the PAL TM Pint and Program Reference Manual.
Note: The PAL TM Print and Program command interpreter is case sensitive! All commands must
be entered exactly as shown in the examples.