RMS Technologies R356-RO CONTROLLER/DRIVER User Manual
Page 15
7. CONFIGURING AND CONTROLLING THE R356
HyperTerminal Setup
Please follow these steps in order to properly set up HyperTerminal:
1.
Open a terminal from your PC by following these steps: Start Menu Programs
Accessories Communications HyperTerminal
2. Assign a name for your New
Connection
3. Determine the correct COM port # by
right clicking on “My Computer” and
selecting “Properties”. Select the
“Hardware Tab” and click on “Device
Manager”.
Note: if you are using the USB485
converter card, first download driver files
(found online:
.
You should then see the RMS USB 485
converter card in the “Ports (COM & LPT)”
area.
If you are connecting via RS232, most
likely it is COM1, “Communications Port”.
R356 Controller & Driver
Page 15
Version 1.01
RMS Technologies
4/3/2009