RMS Technologies R356-RO CONTROLLER/DRIVER - Manual (Page 4)

Table Of Contents
Peak current versus Amps/Phase 24
Designer’s Kit with RS232 communication Error: Reference source not
found
Designer’s Kit with USB communication Error: Reference source not found
R356’s Encoder Option Error: Reference source not found
Default Settings Error: Reference source not found
2. ELECTRICAL SPECIFICATIONS Error: Reference source not found
Digital I/O Specifications Error: Reference source not found
3. OPERATING SPECIFICATIONS Error: Reference source not found
Communication Specifications Error: Reference source not found
4. MECHANICAL SPECIFICATIONS Error: Reference source not found
5. PIN ASSIGNMENTS Error: Reference source not found
Connecting to the new RoHS version RS232 card Error: Reference source
not found
Connecting to the USB card Error: Reference source not found
6. CONNECTION SPECIFICATIONS Error: Reference source not found
Quick Start Error: Reference source not found
RS232-485 converter card Error: Reference source not found
USB-485 converter card Error: Reference source not found
Mating Connectors Error: Reference source not found
7. CONFIGURING AND CONTROLLING THE R356 Error: Reference source not found
HyperTerminal Setup Error: Reference source not found
Setting the Current Error: Reference source not found
Connecting Multiple R356 Units Error: Reference source not found
Changing the Address of the Controller Error: Reference source not found
Connecting Accessories Error: Reference source not found
Push Button Error: Reference source not found
LED or other output Error: Reference source not found
Optical Sensor Error: Reference source not found
8. APPENDIX Error: Reference source not found
Connecting to the non-RoHS RS232 card (with Red 4-Pin) Error:
Reference source not found
Encoder Usage Error: Reference source not found
Position Correction Mode Error: Reference source not found
Overload Report Mode Error: Reference source not found