Festo Пневматические линейные приводы SLG - Manual (Page 25)

SLG−...
Festo SLG−... 0802d English
25
Electrical fitting
When using proximity switches:
Please note
S Make sure that the minimum distances from other proximity switches correĆ
spond to the values specified in the diagram.
In this way you will avoid incorrect switching. If the minimum distances are
not observed, an individual functional check may be necessary.
SME−10−... SMT−10−...
L
7
13 mm 9 mm
Fig. 18
With components of sizes 8 and 12:
S Please note that the switching solenoid is
arranged asymmetrically.
In this way the proximity switches are
distributed asymmetrically on the compoĆ
nent.
Fig. 17
7
УУУУ УУУУ
Fig. 19