Festo Линейно-поворотный зажим CLR - Manual (Page 26)

CLR−...
Festo CLR−... 0912d English 26
Fitting the CLR−...
S Place the CLR−... so that no objects project into the swivel range of the
clamping finger.
S Select one of the fastening possibilities listed in the following table.
Double screw connector with foot
fastening type HNA−... in the threaded
holes of the cover screws With four screws in the threaded
holes of the cover screws:
Ĉ with flange mounting type FNC−...
Ĉ direct fastening
Fig. 13
The different product sizes have connector threads of the following design and
with the following tightening torques:
CLR−... 12 16 20 25 32 40 50 63
Connecting thread M4 M4 M5 M5 M6 M6 M8 M8
Tightening torque [Nm] 2.5 2.5 3 3 6 6 11 11
Fig. 14
S Tighten the screws evenly.