Festo Контроллер крайних положений SPC11 - Manual (Page 22)

1. Installation instructions for the DGCI or DDLI
1-10
Festo P.BE-SPC11-DGCI-EN en 1406d
Proportional directional control valve (
5 )
See system manual type P.BE-SPC11-SYS...
The DGCI-... is suitable both for slide and yoke mode.
Work port 2 of the proportional directional control valve
must be connected to the drive conection which is on the
side with the electrical connection for the potentiometer.
1
1
Electrical connection
Fig. 1/3: Tubing connection for slide mode
1
1
Electrical connection
Fig. 1/4: Tubing connection for yoke mode