Festo Кабели и принадлежности - Manual (Page 96)

A. Technical appendix
A−3
Festo P.BE−SPC200−SMX−1−EN en 0503b
A.1 Technical specifications
Type SPC200−SMX−1
Temperature range
Ĉ Operation
Ĉ Storage/transport
− 5 ... + 50 ° C
− 20 ... + 70 ° C
Weight 69 g
Relative humidity 95 %, non−condensing
Connection SIGNALS (X31)
Ĉ External supply (pin 4, pin 5)
Ĉ Sensor inputs (pin 1 ... 3)
Ĉ Current consumption (at 24 V)
Ĉ Reference potential
24 V DC, ± 15 % 1)
Inputs based on IEC 1131−2 type 2
24 V DC, positive−switching (PNP)
Typ. 8 mA
0 V
Connection AMPLIFIER (X30) 2)
Ĉ Input (+/− READY)
Ĉ Outputs (+/− DIRECT, +/− PULSE,
+/− ENABLE, +/− F/H STEP)
ć Step frequency
ć Frequency ramp
ć Positioning range
ć Resolution
+ 24 V (connected internally with pin 4 of the SIGNALS
plug) via relay contact
Push−pull control (electric as per RS 485)
80 Hz ... 40 kHz
Max. 500 kHz/sec
0.00 ... 9999.99 mm
0.01000 ... 9999.99999 steps/mm
Electromagnetic compatibility
Ĉ Interference emitted
Ĉ Resistance to interference
Tested as per DIN EN 61000−6−4 (industry) 3)
Tested as per DIN EN 61000−6−2 (industry)
Vibration and shock
Ĉ Vibration
Ĉ Shock
Tested as per DIN/IEC 68 part 2−6;
(0.15 mm path at 10 ... 58 Hz,
2 g acceleration at 58 ... 150 Hz)
Tested as per DIN/IEC 68 part 2−27;
(± 30 g at 11ms duration; 15 cycles)
1) Note the tolerance of the connected sensors.
2) Pin−compatible with the stepping motor controllers of the Festo drive package for 5 V control
signals.
3) The SPC200 is intended for industrial usage.