Kramer Electronics VP-4x4K - Manual (Page 16)

12 VP-4x4K - Connecting the VP-4x4K
Figure 5: Control Configuration via RS-232 and RS-485
5.5 Configuring the Ethernet Port
To configure the Ethernet port, you have to connect your PC to the VP-4x4K either
via the Ethernet or via a serial port (see Section 5.3 ). Once the machine is
connected, you can configure the Ethernet port.
5.5.1 Connecting the Ethernet Port Directly to a PC (Crossover
Cable)
You can connect the Ethernet port of the machine to the Ethernet port on your PC,
via a crossover cable with RJ-45 connectors.
Machine # 1 (= Master)
Machine # 2
Machine # 16
Up to 16
Units
RS-485
A B G
RS-485 PINOUT
G
B
A
_
+
..
.