Kramer Electronics VP-4x4K - Manual (Page 33)

VP-4x4K - Controlling via the Embedded Web Pages 29
The Web embedded screens let you control the VP-4x4K via the Ethernet. The
menu appears on the left side of the screen. There are three remote operation
Web pages:
• The switching matrix (see Section 8.2 )
• Audio gain control (see Section 8.3 )
• Configuration (see Section 8.4 )
A help box is available for each screen when clicking the question
mark that appears on the left side of the screen.
8.2 The VP-4x4K Switching Matrix Page
The VP-4x4K switching matrix page lets you route any or all of the four inputs to
any or all of the eight outputs, by clicking the audio and/or video signal indicators
(purple and blue, respectively):
Figure 16: VP-4x4K Embedded Web Page
You can perform the following operations via this Web page:
• Operate in the AFV mode or switch the audio and video separately, by
clicking the Audio, Video or AFV buttons (see
Section 8.2.1 )
• Deselect an audio and/or video signal (depending on the operation mode –
Audio, Video or AFV) by clicking that signal indicator
i