Kramer Electronics VP-4x4K - Manual (Page 20)

16 VP-4x4K - Connecting the VP-4x4K
Figure 9: Device Properties Screen
4. If required, make changes and press Set. If not, click Close.
5.5.4 Control via the Ethernet Port
If you were connected via the serial port, you need to connect to the master unit
(Mach No. 1) via the Ethernet, as described in
Section 5.4 .
5.6 DIP-switch Settings
The VP-4x4K includes two DIP-switches, as Figure 10 defines. Only one of the
DIP-switches is configured:
Figure 10: VP-4x4K DIP-Switches
Function Description
RS-485
TERM
ON for RS-485 line termination with 120Ω
OFF for no RS-485 line termination
When cascading machines, set this DIP-
switch to ON for the first and last units only
(otherwise, set it to OFF)