Kramer Electronics VP-4x4K - Manual (Page 24)

20 VP-4x4K - Operating Your Audio Matrix Switcher
To confirm and exit the DELAY mode, press the either the AUD, VID, or AFV
button, the display shows the inputs switched to the outputs. If not confirmed, this
command times out after 20 seconds.
6.4 Setting the Machine Number
The MACH. # (machine number) determines the position of a VP-4x4K unit when
cascading units.
To set the MACH. #, do the following:
1. Press the front panel buttons: RCL and TAKE simultaneously to access the
MACH. # mode.
The 7-segment display shows the current machine number.
2. Use the + and – front panel buttons to set the machine number as required.
To confirm and exit the MACH. # mode, press either the AUD, VID or AFV buttons.
If not confirmed, this command times out after 20 seconds.
6.5 Choosing the Audio-Follow-Video or Breakaway Option
You can switch stereo audio signals in one of two ways, either:
• Audio-follow-video (AFV), in which all operations and status indicators relate
to both the video and the audio channels; or
• Breakaway, in which video and audio channels switch independently
If the audio differs from the video, then the TAKE button flashes. Also, the audio
outputs, which will be changed, flashes in the status 7-segment display. Press the
TAKE button to confirm the modification. The audio will follow the video. If not
confirmed, this command times out after 20 seconds and the 7-segment display
shows the audio configuration.
Warning that you are about to modify the audio configuration for AFV operation.