1 connecting to the vp-4x4k via your browser, Connecting to the vp-4x4k via your browser, 8controlling via the embedded web pages – Kramer Electronics VP-4x4K User Manual
Page 31
VP-4x4K - Controlling via the Embedded Web Pages
27
8
Controlling via the Embedded Web Pages
You can remotely operate the
VP-4x4K using a Web browser via the Ethernet
connection (see
Section 8.1
). To be able to do so, you must use a supported Web
browser; Microsoft (V6.0 and higher), Chrome or Firefox (V3.0 and higher).
To check that Java is installed correctly and running, browse to:
This page runs a test and displays a Java success (see
) or failure
message.
Figure 12: Java Test Page Success Message
If you do not see the success message, follow the instructions on the page to:
•
Load and enable Java
•
Enable JavaScript in your browser
8.1
Connecting to the VP-4x4K via your Browser
Make sure that your PC is connected via a network to the
VP-4x4K and do the
following:
1. Open your Internet browser.