Kramer Electronics VP-773 - Manual (Page 24)

VP-773 - The OSD Menu 19
19
Note that:

A selected parameter that turns gray becomes valid immediately. You can
press Enter at this point to save these parameter changes to the memory
immediately (t he screen will display “Saving Data” for a split second).

In any case, exiting the menu saves the parameter to the memory

Data is saved per window and per input (to a dedicated input + window
memory), as applicable
The control buttons let you control the VP-773 via the OSD menu. Press the:

MENU (or ) button to enter the menu, exit the menu, and when in the OSD
menu, move to the previous level and change menu settings in the OSD
screen.
Changes are immediate
The default timeout is set to 30 seconds and can be changed (see Section 6.8 )

ENTER (or ) button to access sub-menu items

Arrow buttons to move through the OSD menu

Up or down arrows to change settings
Note that when exiting the menu, all the changes are automatically
saved to the non-volatile memory.
The default OSD timeout for auto exit is set to 30 seconds and can be
changed (see Section 6.8 ).
6.1.1 OSD Control Icons
The following three icons: M , P , and E are included to indicate when functionality
applies to the Main window, the PiP Window or the entire system:

M for Main Window Control

P for PiP window Control

E for Entire System Control
i