Kramer Electronics VP-773 - Manual (Page 32)

VP-773 - The OSD Menu 27
27
6.3 The Audio Menu
Figure 19: Audio Menu
Setting Function
Volume Set the input/output volume level [dB], see Figure 20 E . Set the:
Input Volume [dB] – to adjust the audio input level
Output Volume [dB] – to adjust the audio output level
The output audio level can also be set via the + and – buttons on the front panel
buttons (when not in the OSD mode) and/or the IR remote control transmitter buttons
(see
Section 8.4 )
Mic1 Volume [dB] – to adjust the Microphone 1 audio level
Mic2 Volume [dB] – to adjust the Microphone 2 audio level
Balance Set the balance [ratio] E
Treble Set the treble [dB] E
Bass Set the bass level [dB] E
Mic Effects For Mic 1, set the:
Mic1 Talkover Depth [%]
– to determine the decrease of the audio level during
microphone 1 takeover (press + to further decrease the talkover audio output
level; press
– to lessen the talkover output audio decrease level) E
Mic1 Talkover Trigger [dB] – to determine the microphone 1 threshold level
that triggers the audio output-level decrease E
Mic1 Mix [dB] – set to 1 to enable the Talkover mode or set to any other value
to decrease the Mic1 volume without changing the Line out and Mic2 volume
levels.
In the Mix mode, set the:
Line Mix [dB]
– to decrease of the line out volume level without changing the
Mic 1 and Mic 2 volume levels