Kramer Electronics VP-773 - Manual (Page 52)

VP-773 - Controlling the VP-773 47
47
8.3 Controlling via the VP-773 Web Pages
You can remotely operate the VP-773 using a Web browser via the Ethernet
connection (see Section 8.3.3 ). To be able to do so, you must use a supported
Web browser:
For Windows 7:

Chrome version 25

Internet Explorer version 9

Firefox version 15
For Mac:

Chrome version 25

Safari 6

Firefox version 20
8.3.1 Connecting to the VP-773 via your Browser
Note that if the Protocol is set to Legacy (via the Miscellaneous menu,
see
Section 6.8 ), the Web pages may not function properly.
Make sure that your PC is connected via a network to the VP-773 and do the
following:
1. Open your Internet browser.
2. Enter the unit’s IP number or name in the Address bar of your browser.
If you are using DHCP, you have to enter the name.
The default IP number is 192.168.1.39, and may be changed by the system
integrator
Figure 29: Entering the IP Number in the Address Bar
You can now control the machine via the Web page.
i