Kramer Electronics VP-773 - Manual (Page 48)

VP-773 - The Display Modes 43
43
7.2.1 Activating the Dual Window Mode
You can activate the dual window mode (indicated by an illuminated PIP front panel
button) in any of the following ways:

Press and hold (for 3 seconds) the front panel PIP button
The latest PiP configuration appears

Press the PIP button on the IR remote control transmitter (see Section 8.4 )
The latest PiP configuration appears

Access the OSD menu, select INPUT>Display Mode, and then choose one
of the preset PiP configurations (Picture in Picture, Picture + Picture or Split)

Access the Web pages (see Section 8.3 )
7.2.2 Setting the OSD Menu to PiP Window Control
When the OSD menu is set to PiP Window Control, you can control the PiP window
and change its parameters (for example, select the PiP input, size, position and so
on). Section
7.2.3.3
shows how to select the PiP source via the OSD menu.
To set the OSD menu to PiP control:
1. Press the MENU button to access the OSD menu.
2. Scroll down to the Misc menu and press ENTER.
3. Select the OSD submenu and press ENTER.
4. Select Window Control and choose PIP WINDOW.
The OSD menu controls the PiP source
5. Press the MENU button to exit and accept changes.
The OSD menu title will show PiP Window Control.
6. You can press the MENU button several times to exit the menu and save
changes, or modify PiP window parameters via the other menu items.
To return to Main Window control, repeat the procedure above but select Main
Window in the Window Control submenu.