Kramer Electronics VP-773 - Manual (Page 25)

20 VP-773 - The OSD Menu
6.2 The Input Menu
Figure 10: Input Menu
Setting Function
Display Mode
Select the display mode (see Figure 11 ):
Single Window – single window mode operation with one channel displayed E
Picture in Picture (PiP) – dual window mode operation, a smaller window
superimposed over a full screen image (see Section 7.2 ) E
Picture + Picture (PoP) – dual window mode operation, both images appear
side-by-side and the aspect ratios of both images are maintained (see
Section 7.2 ) E
Split (SbS) – dual window mode operation, both images are placed side-by-
side with the same height (see Section 7.2 ) E
When selecting the dual window mode, set the Main window or the PiP window
parameters via Misc -> OSD -> Window Control (see
Section 6.8 )
Note that while browsing the OSD menu in the dual window mode, press of the PIP
button to instantly toggle the window control (between Main and PiP)
Customized – customized image size E
Note that any change in the output resolution may cause
disproportion or even cancel the window customization.
Input Source Select the input source: HDMI1, HDMI2, HDMI3, HDMI4, PC1, PC2, CV or
DP
M / P
Note that any change in the input source may cancel the freeze
and blank settings.
i
i