Kramer Electronics VP-773 - Manual (Page 30)

VP-773 - The OSD Menu 25
25
To move the position of the window, do the following:
1. Check that window control is set as required (for example, PiP Window
Control).
2. Select Window Customization.
The following Window appears:
Figure 16: Window Customization
3. To move the picture to the right, select H Position.
An OSD slide bar appears:
Figure 17: H-Position Slide Bar
4. Press the +/- buttons to move the PiP window horizontally.
Use the V Position menu item in the same way to move the PiP vertically,
see Figure 18 .