Cirrus Logic CS4265 - Manual (Page 22)

22 DS657F3
CS4265
SWITCHING CHARACTERISTICS - I²C CONTROL PORT
Inputs: Logic 0 = DGND = AGND = 0 V, Logic 1 = VLC, C
L
= 30 pF.
24. Data must be held for sufficient time to bridge the transition time, t
fc
, of SCL.
25. Guaranteed by design.
Parameter Symbol Min Max Unit
SCL Clock Frequency f
scl
- 100 kHz
RESET Rising Edge to Start t
irs
500 - ns
Bus Free Time Between Transmissions t
buf
4.7 - µs
Start Condition Hold Time (prior to first clock pulse) t
hdst
4.0 - µs
Clock Low time t
low
4.7 - µs
Clock High Time t
high
4.0 - µs
Setup Time for Repeated Start Condition t
sust
4.7 - µs
SDA Hold Time from SCL Falling (Note 24) t
hdd
0 - µs
SDA Setup time to SCL Rising t
sud
250 - ns
Rise Time of SCL and SDA (Note 25) t
rc
, t
rd
- 1 µs
Fall Time SCL and SDA (Note 25) t
fc
, t
fd
- 300 ns
Setup Time for Stop Condition t
susp
4.7 - µs
Acknowledge Delay from SCL Falling t
ack
300 1000 ns
t buf
t hdst
t
low
t
hdd
t high
t sud
Stop Start
S D A
S C L
t irs
RS T
t hdst
t rc
t fc
t sust
t susp
Start Stop
Repeated
t rd t fd
t ack
Figure 8. Control Port Timing - I²C Format