Cirrus Logic CS4354 User Manual
V stereo dac with 2-v, Ground-centered output, Cs4354
Advertising
Table of contents
Document Outline
- 1. Pin Descriptions
- 2. Characteristics and Specifications
- Recommended Operating Conditions
- Absolute Maximum Ratings
- DAC Analog Characteristics
- Combined Digital and On-Chip Analog Filter Characteristics
- Switching Specifications - Serial Audio Interface
- Digital Interface Characteristics
- Internal Power-On Reset Threshold Voltages
- DC Electrical Characteristics
- 2.1 Digital I/O Pin Characteristics
- 3. Typical Connection Diagram
- 4. Applications
- 4.1 Ground-Centered Line Outputs
- 4.2 Sample Rate Range/Operational Mode Detect
- 4.3 System Clocking
- 4.4 Serial Clock
- 4.5 Internal High-Pass Filter
- 4.6 Digital Interface Format
- 4.7 Internal Power-On Reset
- 4.8 Initialization
- 4.9 Recommended Operational Sequences
- 4.10 Grounding and Power Supply Arrangements
- 5. Combined Digital and On-chip Analog Filter Response Plots
- Figure 10. Single-Speed Stopband Rejection
- Figure 11. Single-Speed Transition Band
- Figure 12. Single-Speed Transition Band (detail)
- Figure 13. Single-Speed Passband Ripple
- Figure 14. Double-Speed Stopband Rejection
- Figure 15. Double-Speed Transition Band
- Figure 16. Double-Speed Transition Band (detail)
- Figure 17. Double-Speed Passband Ripple
- Figure 18. Quad-Speed Stopband Rejection
- Figure 19. Quad-Speed Transition Band
- Figure 20. Quad-Speed Transition Band (detail)
- Figure 21. Quad-Speed Passband Ripple
- 6. Parameter Definitions
- 7. Package Information
- 8. Ordering Information
- 9. Revision History