Cirrus Logic CK4970x4 - Manual (Page 50)

5-7 Copyright 2012 Cirrus Logic, Inc. DS898CK7
Running the CK49x Board in Standalone Mode
CK49x User’s Manual
3. Press the RIGHT button or the Rotary Knob to activate the Surround Sound submenu option of your
choice. Once the option is chosen, an asterisk (*) will appear next to the option indicating that the
option is now the new default.
4. Press the MENU or EXIT button to exit the Set-up mode.
Figure 5-5. Setting Surround Mode
5.4.5 Selecting the Virtualizer Mode
Follow these steps to select the Virtualizer Mode. See Figure 5-6 to view the Virtualizer Mode display on
the system LCD.:
1. Press the MENU button to enter Set-up mode.
2. Turn the Rotary Knob until “Virtualizer>” appears on the LCD screen. Press the Rotary Knob to
access the set of available Virtualizer submenu options. Turn the Rotary Knob clockwise/
counterclockwise to browse through the submenu options. In the Virtualizer submenu, “None”
disables the Virtualizer> mode and pressing “RETURN” goes back to top of the Set-up menu.
3. Press the RIGHT button or the Rotary Knob to activate the Virtualizer submenu option of your choice.
Once the option is chosen, an asterisk (*) will appear next to the option indicating that the option is
now the new default.
4. Press the MENU or EXIT button to exit the Set-up mode.
Figure 5-6. Setting the Virtualizer Mode
5.4.6 Selecting the Bass Management Mode
Follow these steps to select the Bass Management Mode. See Figure 5-7 to view the Bass Management
Mode display on the system LCD.:
1. Press the MENU button to enter Set-up mode.
2. Turn the Rotary Knob until “Bass Management>” appears on the LCD screen. Press the Rotary Knob
to access the set of available Bass Management submenu options. Turn the Rotary Knob clockwise/
counterclockwise to browse through the submenu options.
3. Press the RIGHT button or the Rotary Knob to activate the Bass Management submenu option of
your choice. Once the option is chosen, an asterisk (*) will appear next to the option indicating that the
option is now the new default.
4. Press the MENU or EXIT button to exit the Set-up mode.