Norgren Prospector Series Datasheets - Manual (Page 3)

Littleton, CO USA Phone: 303-794-2611 www.norgren.com VAL-12-3
Prospector Series Poppet Valves
Standard Solenoid Operator Features
Rotatable Connector and Coil
The standard cable grip connector used on basic 1/4" and 1/2"
valves can be rotated 180°, and the solenoid coil can be turned in
increments of 90°, making the operators adaptable for easy
installation. The standard cable grip connector used on basic 1"
and 2" valves can be turned in increments of 90°.
Low Wattage Solenoid Operators
The standard solenoid operator used on basic 1/4" and 1/2"
valves requires only 6 WDC and 7 WAC of power. It is available in
a low wattage option that requires only 2 WDC and 3.5 WAC. The
standard solenoid operator used on basic 1" and 2" valves
requires 8 WAC and DC.
Solenoid Diffuser Plug
A diffuser plug installed in the pilot exhaust on basic 1/4" and 1/2"
valves helps prevent entry of contaminants during shipping and
normal operation. It may be removed when minimum response
times are desired.
Electrical Connector Identification
Up to three lettered or numbered plates snap into a slot molded
into the standard cable grip connector to identify that operator
within the system.
Solenoid Manual Overrides.
Standard solenoid operators are furnished with
a nonlocking manual override to provide a
means of shifting the valve without electrical
power. Optional solenoid operators with a
locking override, or without an override, are
also available.
High Flow Pilot Exhaust Orifice.
Oversize pilot exhaust orifice provides rapid
return time when valve is de-energized.
Electrical Connector Options.
A cable grip connector with indicator light; a
1/2" NPT conduit connector; and a 5- foot,
three-conductor, molded cable with or without
indicator light, surge protection and reverse
voltage protection are available.