Norgren Flow Controls - Manual (Page 6)

FIT-3-6 Littleton, CO USA Phone 303-794-2611 www.norgren.com
Function Fittings and Flow Controls
● Compact size/low weight/In-line units
● High Flow Performance
● Suitable for panel and wall mounting
● Provides linear flow adjustment
● Locking adjustment
● Captive adjustment needle will not blow out
when unscrewed
● Index line on adjusting knob
● Available in M5, 1/8, 1/4, 3/8, and 1/2 porting
T1000 Series In-Line Flow Controls
Technical Data
Fluid: Compressed air, nitrogen, inert and non-combustible gases
compatible with materials of construction.
Note:
For other types of fluids or compressed gases, please
consult factory.
Operation:
Uni-directional flow control.
Mounting:
In-line. Panel mounted by hexagonal mounting nut. Wall mounted via
through-holes in regulator body.
Port size: NPT ISO G
T1000M0500 - M5
1/8 T1000A1800 T1000C1800
1/4 T1000A2800 T1000C2800
3/8 T1000A3800 T1000C3800
1/2 T1000A4800 T1000C4800
Operating pressure:
15 to 145 psig (1-10 bar)
5 to 145 psig (0.3 to 10 bar) -M5
Operating Temperature:
0° to 175°F (-20° to 80°C)
Consult our technical service for use below 35°F (2°C)
Opening Pressure (N-R Valve)
15 psig (1 bar)
Materials
1/8, 1/4: Aluminum alloy body, Nitrile seals, brass needle and
internal parts, external parts in aluminum alloy.
3/8, 1/2: Aluminum alloy body, Nitrile seals, brass needle and
internal parts, external parts in aluminum alloy.
M5: Aluminum alloy body, nitrile seals and brass needle.
Ordering Information
To order, quote product number from table on page
FIT-3-7: i.e. T1000A2800 for 1/4 NPT model.
Alternate Models:
T1100C1800 - 1/8" Bi-directional ISO G
T1100A1800 - 1/8" Bi-directional NPT
T1100C2800 - 1/4" Bi-directional ISO G
T1100A2800 - 1/4" Bi-directional NPT
2 1
1 2
ISO Symbol