Replacing the power supply – Lenovo S310 All-in-One User Manual
Page 104
6. Remove the two screws
1
that secure the system fan to the system board shield, and then disconnect
the system fan cable from the system board connector on the system board.
Figure 25. Removing the system fan
7. To reinstall the system fan, place the system fan on the system board shield so that the two screw
holes align with those on the system board shield. Reinstall the two screws to secure the system fan
to the system board shield.
8. Reconnect the system fan cable to the system fan connector on the system board. See “System
board parts and connectors” on page 82
9. Reinstall the system board shield. See “Removing and reinstalling the system board shield” on page 96.
10. Go to “Completing the parts replacement” on page 121.
Replacing the power supply
Attention
Do not open your computer or attempt any repair before reading and understanding the “Important safety
information” in the Safety, Warranty, and Setup Guide that came with your computer. To obtain a copy of the
Safety, Warranty, and Setup Guide, go to:
This section provides instructions on how to replace the power supply.
To replace the power supply, do the following:
98
Lenovo S310 All-In-OneHardware Maintenance Manual