Lenovo S310 All-in-One User Manual

Page 70

Advertising
background image

Diagnostic Error Code

FRU/Action

015-198-XXX USB port test aborted

1. If a component is called out, make sure it is

connected and/or enabled. See Chapter 6 “Using
the Setup Utility program” on page 51.

2. Flash the system and re-test. See “Flash update

procedures” on page 127.

3. Go to “Undetermined problems” on page 76.

015-199-XXX USB port test failed, cause unknown

1. Go to “Undetermined problems” on page 76.

2. Flash the system and re-test. See “Flash update

procedures” on page 127.

3. Replace component under function test.

018-000-XXX PCI Card Test Passed

No action

018-0XX-XXX PCI Card Failure

1. Riser card, if installed.

2. System board

018-195-XXX PCI Card Test aborted by user

1. PCI card

2. Information only Restart the test, if necessary

018-196-XXX PCI Card test halt, error threshold exceeded

1. Press F3 to review the log file

2. Restart the test to reset the log file

018-197-XXX PCI Card test warning

1. Make sure the component that is called out is

connected and/or enabled. See Chapter 6 “Using
the Setup Utility program” on page 51.

2. Re-run test.

3. Replace the component that is called out in warning

statement.

4. Replace the component under test.

018-198-XXX PCI Card test aborted

1. If a component is called out, make sure it is

connected and/or enabled. See Chapter 6 “Using
the Setup Utility program” on page 51.

2. Flash the system and re-test. See “Flash update

procedures” on page 127.

3. Go to “Undetermined problems” on page 76.

018-199-XXX PCI Card test failed, cause unknown

1. Go to “Undetermined problems” on page 76.

2. Flash the system and re-test. See “Flash update

procedures” on page 127.

3. Replace component under function test.

018-250-XXX PCI Card Services error

1. PCI card

2. Riser card, if installed.

3. System board

020-000-XXX PCI Interface Test Passed

No action

020-0XX-XXX PCI Interface error

1. PCI card

2. Riser card, if installed.

3. System board

020-195-XXX PCI Test aborted by user

Information only Restart the test, if necessary

020-196-XXX PCI test halt, error threshold exceeded

1. Press F3 to review the log file.

2. Restart the test to reset the log file.

64

Lenovo S310 All-In-OneHardware Maintenance Manual

Advertising