Lenovo S310 All-in-One User Manual
Page 96
Safety, Warranty, and Setup Guide, go to:
This section provides instructions on how to replace the hard disk drive.
To replace the hard disk drive, do the following:
1. Remove all media from the drives and turn off all attached devices and the computer. Then, disconnect
all power cords from electrical outlets and disconnect all cables that are connected to the computer.
2. Remove the computer cover. See “Removing the computer cover” on page 89.
3. Locate the hard disk drive in the computer. See “FRU locations” on page 80.
4. Remove the screw that secures the hard disk drive.
Figure 15. Removing the screw that secures the hard disk drive
5. Disconnect the hard disk drive cable and slide the hard disk drive out of the chassis.
90
Lenovo S310 All-In-OneHardware Maintenance Manual