Lenovo S310 All-in-One User Manual

Page 75

Advertising
background image

Diagnostic Error Code

FRU/Action

080-199-XXX Game Port interface test failed, cause
unknown

1. See “Undetermined problems” on page 76.

2. Flash the system and re-test. See “Flash update

procedures” on page 127.

3. Replace component under function test.

086-000-XXX Mouse Port interface Test Passed

No action

086-001-XXX Mouse Port interface Presence

1. Mouse

2. System board

086-032-XXX Mouse Port interface Device controller failure

1. Mouse

2. System board

086-035-XXX Mouse Port interface Reset

1. Mouse

2. System board

086-040-XXX Mouse Port interface IRQ failure

1. Run the Setup Utility program.

2. Mouse

3. System board

086-195-XXX Mouse Port interface Test aborted by user

Information only Restart the test, if necessary.

086-196-XXX Mouse Port interface test halt, error
threshold exceeded

1. Press F3 to review the log file.

2. Restart the test to reset the log file.

086-197-XXX Mouse Port interface test warning

1. Make sure the component that is called out is

connected and/or enabled. See Chapter 6 “Using
the Setup Utility program” on page 51
.

2. Re-run test.

3. Replace the component that is called out in warning

statement.

4. Replace the component under test.

086-198-XXX Mouse Port interface test aborted

1. If a component is called out, make sure it is

connected and/or enabled. See Chapter 6 “Using
the Setup Utility program” on page 51
.

2. Flash the system and re-test. See “Flash update

procedures” on page 127.

3. Go to “Undetermined problems” on page 76.

086-199-XXX Mouse Port interface test failed, cause
unknown

1. See “Undetermined problems” on page 76.

2. Flash the system and re-test. See “Flash update

procedures” on page 127.

3. Replace component under function test.

089-000-XXX Microprocessor Test Passed

No action

089-XXX-XXX Microprocessor failure

1. Microprocessor(s)

2. System board

089-195-XXX Microprocessor Test aborted by user

Information only Restart the test, if necessary.

089-196-XXX Microprocessor test halt, error threshold
exceeded

1. Press F3 to review the log file.

2. Restart the test to reset the log file.

Chapter 7

.

Symptom-to-FRU Index

69

Advertising