Konica Minolta BIZHUB C360 - Manual (Page 100)

bizhub C360/C280/C220 5-43
5.4 [Application] 5
[Rectangular]
[Bevel]
0 If erasing is not performed as desired, set [Erase Operation] under [Erase Adjustment] in Administrator
Settings.
0 The size of the original automatically detected is 3/8 e 3/8 inch (10 e 10 mm) or larger.
If the detection fails, a blank sheet of paper is output.
0 You cannot make copies with the ADF closed.
0 The original image may be defected at its top or end.
%
Press [Application] ö [Erase] ö [Non-Image Area Erase].
d
Reference
To set Erase Operation:
Press the Utility/Counter key ö [Administrator Settings] ö [System Settings] ö [Expert Adjustment] ö
[Erase Adjustment].