10 [user box settings, 11 [standard size setting, User box settings] -19 – Konica Minolta BIZHUB C360 User Manual
Page 156: Standard size setting] -19
bizhub C360/C280/C220
7-19
7.1
[System Settings]
7
d
Reference
To configure user authentication/account track:
Press the Utility/Counter key ö [Administrator Settings] ö [User Authentication/Account Track] ö [General
Settings].
7.1.10
[User Box Settings]
This setting is for the User Box functions. For details, refer to the [User's Guide Box Operations].
7.1.11
[Standard Size Setting]
Configure settings relating to the capability for detecting original size and the foolscap paper sizes.
For details on displaying this item, contact your service representative.
%
Press the Utility/Counter key ö [Administrator Settings] ö [System Settings] ö [Standard Size Set-
ting].
Factory default
[Priority Mode]
[Copy]
[System Auto Reset Time]
1 minute
[Auto Reset]
•
[Copy]: 1 Minute
•
[Scan/Fax]: 1 Minute
•
[User Box]: 1 Minute
[When Account is changed]
[Reset]
[When original is set on
ADF]
[Do Not Reset]
[Next Job]
•
[Staple Setting]: [OFF]
•
[Original Set/Bind Direction]: [OFF]
•
[Reset Data After Job]: [Reset All]
Settings
[Original Glass Original
Size Detect]
Configure the capability for detecting original sizes.
[8 1/2e14/Foolscap Size
Detection] (Centimeter
area only)
Specify whether to detect a size of 8-1/2 e 14 or a foolscap size.
[Foolscap Size Setting]
Select the size that you want to use when the paper size is close to 13 inch-
es.