Konica Minolta BIZHUB C360 - Manual (Page 231)

bizhub C360/C280/C220 10-17
10.1 Using an authentication unit (biometric type) 10
12
Click [Write].
% Data Administrator provides the batch copy function that batch-configures the registered user
data in multiple machines with the authentication unit enabled.
The registered user data is configured in this machine.
13
Click [OK].
14
Disconnect the authentication unit from the USB port of the computer.
15
Turn the Main Power Switch of this machine off, connect the authentication unit to this machine, and
turn the Main Power Switch of this machine on.
NOTICE
To turn the Main Power Switch off and on, first turn the Main Power Switch off, and then turn it on
after 10 or more seconds has elapsed. Not doing so may result in an operation failure.
When connecting or disconnecting the USB cable, hold the plug. Otherwise, the machine may be dam-
aged or a failure may occur.