Konica Minolta BIZHUB C360 - Manual (Page 76)

bizhub C360/C280/C220 5-19
5.3 [Quality/Density] 5
Settings
[Original Type] Select the original type (text and image type) to obtain better copy quality.
[Text] Copies originals containing only text. The edges of
copied text are reproduced with sharpness, pro-
viding an image that is easy to read.
[Text/Photo] [Photo Paper]:
Select this setting to print photos from originals
containing both text and images onto photograph-
ic paper. A smooth copy image is produced.
[Printed Photo]:
Select this setting to copy printed originals con-
taining both text and images, such as pamphlets or
catalogs.
[Photo] [Photo Paper]:
Select this setting when the original photos are
printed on photographic paper. Select this setting
to produce better reproductions of halftone original
images (photographs, etc.) that cannot be repro-
duced with the usual settings. A smooth copy im-
age is produced.
[Printed Photo]:
Select this setting to copy printed originals, such
as pamphlets or catalogs. Halftone original images
(photographs, etc.) that cannot be reproduced with
the usual settings will be reproduced in as nearly
an original state as possible.
[Map] Select this setting when copying originals with a
background color or originals containing pencil
markings or fine colored lines such as maps. A
sharp copy image is produced.
[Dot Matrix Original] Select this setting when copying originals contain-
ing only text that appears faint (such as that written
with a pencil). The copied text is reproduced so
that it is darker, making it easier to read.
[Copied Paper] Select this setting to copy images (originals) print-
ed using this machine.
[Density] Adjust copy density.
[Background Removal] Adjust the density of the background area for originals with colored back-
ground (newsprints, recycle paper, etc.) or originals on thin paper showing
text or images from the back.
Select [Auto] for [Background Removal Level] to enable automatic back-
ground density adjustment for copying with the optimal background density.
For [Background Removal], normally [Bleed Removal] is selected. However,
when copying an original with colored background, select [Paper Discolor-
ation Adj] to make adjustment for background removal for copying.