Konica Minolta BIZHUB C360 - Manual (Page 148)

bizhub C360/C280/C220 7-11
7.1 [System Settings] 7
[User Paper Settings] Configure special paper settings for [User Paper 1] through [User Paper 5].
Settings to configure include Basic Weight and Media Adjustment.
For details on displaying this item, contact your service representative.
[Erase Adjustment] [Non-Image Area Erase Opera-
tion Settings] Configure Non-Image Area operation
settings.
[Auto]:
Automatically detects the background
density of the original, and selects ei-
ther [Bevel] or [Rectangular] accord-
ingly.
[Specify]:
Allows you to manually specify an
erase method and original density. As
an erase method, select [Bevel] or
[Rectangular]. Specify an original den-
sity from five levels.
Factory default
[AE Level Adjustment] Standard (2)
[Leading Edge Adjustment] 0.0 mm
[Centering] 0.0 mm
[Leading Edge Adjustment
(Duplex Side 2)] 0.0 mm
[Centering (Duplex 2nd
Side)] 0.0 mm
[Media Adjustment] [Auto]
[Center Staple Position] 0.0 mm
[Half-Fold Position] 0.0 mm
[Punch Horizontal Position
Adjustment] 0
[Punch Regist Loop Size
Adjustment] 0
[Paper Alignment Plate
Settings] 0.0 mm
[Density Adjustment] 0
[Image Stabilization Only] [Image Stabilization Only]
[Image Stabilization Set-
ting] [Standard]
[Paper Separation Adjust-
ment] 0.0 mm
[Color Registration Adjust] 0 dot
[Prior Detection Setting] [Yes]
[Warning Display]: [TYPE2]
[Detection level]: [Std.]
[Feed Cleaning Settings] [Clean]
[Non-Image Area Erase
Operation Settings] [Erase Operation]: [Specify]
[Erase Method]: [Rectangular]
[Original Density]: [1]
Settings