Konica Minolta BIZHUB C360 - Manual (Page 114)

bizhub C360/C280/C220 5-57
5.4 [Application] 5
d
Reference
To prohibit changing the overlay registration:
Press the Utility/Counter key ö [Administrator Settings] ö [System Settings] ö [Restrict User Access] ö
[Restrict Access to Job Settings] ö [Change Registered Overlay].
Settings
[Recall Overlay Image] Specify whether to print a registered overlay image on the front or back side.
Press an item to select an overlay image and configures its setting.
•
You cannot select an overlay image when no overlay has been regis-
tered.
[Thumbnail
View]/[Display Name] In the thumb-nail view, you can check overlay im-
ages. In the Display Name mode, you can check
overlay images using their file names. Select the
desired overlay image.
[Detail Settings] [Density]: Use the keypad to enter the density of an
overlay image. (using a value between 20 to 100%)
[Color]: Select the color of overlay image from [Full
Color], [Black], [Red], [Blue], [Green], [Yellow], [Cy-
an], or [Magenta].
[Composition]:
[Transparent]
Composes overlay image to be superimposed and
increases the brightness of the image. This setting
prevents an original from being hidden by the com-
posed overlay image.
[Background Composition (Original)]
Composes the original as the background. The
overlay image is superimposed on the original
when they are printed.
[Back]
Composes the overlay image as the background.
The original is superimposed on the overlay image
when they are printed.
[Image Details] Check the [Name], [Registered Date], [Image Size],
and [Color] of the overlay image.
To confirm the enlarged overlay image, press [Pre-
view].
[Register Overlay Image] [New] Enter the name of the overlay image to be regis-
tered.
Load the overlay image original on the original
glass and press the Start key to have the overlay
image registered.
[Overwrite] Select an overlay image to use for overwrite and
press [Overwrite].
Load the overlay image original on the original
glass and press the Start key to have the overlay
image overwritten.
[Delete] Select an overlay image to be deleted and press
[Delete].
[Detail Settings] [Density]:
Specify the density of an overlay to be registered
between 20% and 100%.
[Color]:
Select the color for the overlay image to be regis-
tered from [Auto Color], [Full Color] and [Black].
[Pages] Select to print the overlay image on all pages or only on the first page.
[Original Size] Select [Auto] to detect the size of the original automatically.
If the size of the original is not automatically detected, select the original
size.
[Custom Size] Enter the original size.
[Photo Size] Select the photo size.