Konica Minolta BIZHUB C360 - Manual (Page 179)

bizhub C360/C280/C220 7-42
7.9 [System Connection] 7
7.9 [System Connection]
Configure settings for software, cellular phone, or PDA that can be accessed with this machine.
%
Press Utility/Counterö[Administrator Settings]ö[System Connection].
Settings
[OpenAPI Set-
tings] [Access Setting] Specify whether to allow the user to access this machine from
other system that is using OpenAPI.
[SSL/Port Set-
tings] [SSL Setting] To use SSL encryption, select [SSL Only]
or [SSL/Non-SSL].
•
If [Enhanced Security Mode] is ena-
bled, [SSL Only] is enabled.
[Port No.] Enter a port number.
[Port Number
(SSL)] Enter the port number to be used for SSL
communication.
[Client Certificate] Specify whether to request for client cer-
tificates.
If you authenticate the client by request-
ing for its certificate (verification of client
certificate), select [Enable].
[Certificate Verifi-
cation Level Set-
tings] To verify a certificate, configure settings
to verify the certificate.
[Expiration Date]:
Select whether to check that the target
certificate is within the validity period.
[Key Usage]:
Select whether to check that the certifi-
cate key is being used properly.
[Chain]:
Select whether to check that the certifi-
cate chain (certification path) is correct.
[Expiration Date Confirmation]:
Select whether to check the target certif-
icate for validation.
[CN]
Select whether to check that the CN of
the certificate matches the server ad-
dress.
[Authentication] Specify whether to authenticate an access from other system
that is using OpenAPI.
•
To authenticate, enter the login name and password in
[Login Name] and [Password].
• When user authentication is performed or when acquiring
the device information with the PageScope Authentica-
tion Manager, set the Authentication setting of the
OpenAPI Setting screen of the machine to [OFF].