10 [security settings, 1 [administrator password, 2 [user box administrator setting – Konica Minolta BIZHUB C360 User Manual
Page 181: Security settings] -44, Administrator password] -44, User box administrator setting] -44
bizhub C360/C280/C220
7-44
7.10
[Security Settings]
7
7.10
[Security Settings]
Configure the settings for the restricting the functions of this machine for processing secret data.
7.10.1
[Administrator Password]
Change the administrator password.
0
The administrator password can be entered using 0 through 8 digits.
0
If password rules are specified, an 8-digit password must be entered.
0
If you enter an incorrect administrator password a configured number of times, you are prohibited from
using this machine. In this case, contact your service representative.
1
Press the Utility/Counter key ö [Administrator Settings] ö [Security Settings] ö [Administrator Pass-
word].
2
Enter the administrator password, and then press [OK].
3
Enter a new administrator password.
4
Press [Password Confirmation], and enter the administrator password again.
5
Press [OK].
The password is changed.
d
Reference
To configure password rule settings:
Press the Utility/Counter key ö [Administrator Settings] ö [Security Settings] ö [Security Details] ö [Pass-
word Rules].
7.10.2
[User Box Administrator Setting]
Configure settings for the User Box operations. For details, refer to the [User's Guide Box Operations].
Factory default
[Administrator Password]
12345678