Konica Minolta BIZHUB C360 - Manual (Page 185)

bizhub C360/C280/C220 7-48
7.10 [Security Settings] 7
7.10.5 [Enhanced Security Mode]
The enhanced security mode cannot be enabled when any of the current functional settings conflict with the
enhanced security mode.
When the enhanced security mode is enabled, the settings required for the mode or the settings that have
been forcibly switched when entering the mode cannot be changed.
Required settings
To enable the enhanced security mode, the following settings must have been configured.
Settings to forcibly changed
When the enhanced security is enabled, the following settings are forced.
- The changed settings will not revert when the enhanced security mode is turned off.
- After the password rules have been changed, any passwords that do not comply with the changed rules
will not be authenticated. For details on the password rules, refer to page 7-46.
- For details on the network settings to be forcibly changed, refer to the [User's Guide Network
Scan/Fax/Network Fax Operations].
[Job History Thumbnail
Display] [OFF]
[Secure Print Only] [No]
[Copy Guard] [No]
[Password Copy] [No]
Factory default
Administrator Settings Required settings
[User Authentication/Account Track] / [General
Settings] / [User Authentication] Select either [ON (External Server)] or [ON (MFP)].
•
When you enable account track, select [Ac-
count Name & Password] for the account track
input method.
[Security Settings] / [Administrator Password] Set a password complying with password rules.
[Security Settings] / [HDD Settings] / [HDD Encryp-
tion Setting] Specify a HDD encryption passphrase.
[Security]/[PKI Settings]/[SSL Setting] in Page-
Scope Web Connection • Set [Mode using SSL/TLS] to [Admin. Mode]
and [User Mode].
• Set [Encryption Strength] to [AES-256] or
[3DES-168].
• [Image Controller Setting]
• [Management Function Choice]
• [CE Password]
• [CE Authentication]
• [HDD]
All the settings above must be configured by your
service representative.
These items must be configured by your service
representative. For details, contact your service
representative.
Administrator Settings Settings to forcibly changed
[System Settings] / [Restrict User Access] / [Re-
strict Access to Job Settings] / [Registering and
Changing Addresses] Set to [Restrict].
[User Authentication/Account Track] / [General
Settings] / [Public User Access] Set to [Restrict].
[User Authentication/Account Track] / [User Au-
thentication Settings] / [Administrative Settings] /
[User Name List] Set to [OFF].
[User Authentication/Account Track] / [Print with-
out Authentication] Set to [Restrict].